CPU 319-3 PN/DP
更新：2025-6-7 13:43:00 點擊：
產品介紹
技術參數 概述
- The CPU with high command processing performance, large program memory and quantity framework for demanding applications
- For cross-sector automation tasks in series machine, special machine and plant construction
- Used as central controller in production lines with central and distributed I/O on PROFIBUS and PROFINET
- Distributed intelligence in Component Based Automation (CBA) on PROFINET
- PROFINET 代理，用于基于部件的自動化（CBA）中的 PROFIBUS DP 智能設備
- Isochronous mode on PROFIBUS
- Optionally supports the use of SIMATIC engineering tools
CPU 運行需要微存儲卡
應用
The CPU 319-3 PN/DP is the fastest S7-300 CPU with a large program memory. It is used in plants containing distributed automation structures in addition to centralized I/O. It is used, for example, as central controller in production lines or as machine controller with high processing speed demands.
Its quantity framework makes it optimally suitable for use of SIMATIC engineering tools, e.g.:
- 用SCL編程
- Sequence programming with S7-GRAPH
Furthermore, the CPU is an ideal platform for simple software-implemented technological tasks, e.g.:
- Motion control with Easy Motion Control
- Solving of closed-loop control tasks using STEP 7 blocks or standard/modular PID control runtime software
Enhanced process diagnostics can be achieved by using SIMATIC S7-PDIAG.
As a result of the CPU's integral communications facilities, networked automation solutions are possible without additional components.
設計
CPU 319-3 PN/DP 裝配有：
- Multi-processor system with additional ERTEC 400 ASIC for PROFINET communication
- High command processing and communications performance
- 1.4 MB RAM (corresponds to approx. 470 K instructions);
the extensive RAM for program components relevant to execution offers sufficient space for user programs. Micro Memory Cards (8 MB max.) as load memory for the program also allow the project to be stored in the CPU (complete with symbols and comments) and can be used for data archiving and recipe management. - Flexible expansion capability;
max. 32 modules (4-tier configuration) - Combined MPI/DP interface;
the first MPI/DP integrated interface can establish as many as 32 connections simultaneously to S7-300/400 or connections to PG, PC, OP. Of the connections, one is permanently reserved for programming devices and one for OPs.
The MPI supports simple networking of up to 32 CPUs over "Global data communication".
This interface can be reconfigured from MPI interface to DP interface.DP接口可作為DP主站或DP從站使用。
PROFIBUS DP interface:
The PROFIBUS DP V1 standard is fully supported.這將增加 DP V1 標準從站在診斷和參數賦值能力的范圍。 - DP interface;
the second DP integrated interface can establish as many as 32 connections simultaneously to S7-300/400 or connections to PG, PC, OP. One of the connections is permanently reserved for PG and one for OP.
The DP interface can be used as DP master or DP slave. PROFIBUS DP slaves can be operated in isochronous mode at this interface. The PROFIBUS DP V1 standard is fully supported.這將增加 DP V1 標準從站在診斷和參數賦值能力的范圍。 - Ethernet interface;
the third integrated interface of the CPU 319-3 PN/DP is a PROFINET interface based on Ethernet TCP/IP. It supports the following protocols: - SIMATIC 控制器間進行數據通訊的 S7 通訊
- PG/OP communication for programming, commissioning and diagnostics through STEP 7
- 與HMI和SCADA連接的PG/OP通訊
- Open TCP/IP, UDP and ISO-on-TCP (RFC1006) communication over PROFINET
- SIMATIC NET OPC-Server for communication with other controllers and I/O devices with own CPU
功能
- 口令保護；
用戶程序使用密碼保護，可防止非法訪問。 - Diagnostics buffer;
The last 100 errors and interrupt events are saved in a buffer for diagnostics purposes. - Maintenance-free data backup;
the CPU automatically saves all data (up to 700 KB) in case of power failure so that the data are available again unchanged when the power returns.
參數屬性
STEP 7可用于對S7組態設置參數以及設置CPU的屬性和響應參數：
- MPI multi-point interface;
Determination of node addresses. - Restart/cycle time behavior;
stipulation of maximum cycle time and loading - Isochronous mode interrupts;
setting of DP master system, sub-process image number and delay time - Clock memories;
Address setting - Retentivity;
Setting of retentive areas - Time-of-day interrupts;
Setting of date, time of start and periodicity - Cyclic interrupts;
Setting of periodicity - System diagnostics;
Definition of the handling and scope of diagnostics messages - Clock;
Setting of synchronization mode in AS or on MPI - Protection level;
definition of access rights to program and data - Operation;
selection of either test or process mode - Communication;
reservation of connection resources - PROFIBUS DP master/slave interfaces;
user-defined address assignment for distributed I/O - PROFINET interface;
parameterization of time synchronization using NTP procedure
信息指示功能
- Status and error indications;
LEDs indicate e.g. hardware, programming, time, I/O or bus errors, as well as operating states such as RUN, STOP and restart. - Test functions;
The PG can be used to display signal states in program execution, modify process variables independently of the user program, and read out the contents of stack memories. - Information functions;
You can use the programming device to obtain information about the storage capacity and operating mode of the CPU as well as the current utilization of the main and load memories, current cycle times and diagnostic buffer contents in plain text.
集成的通訊功能
- PG/OP通訊
- 共享數據通訊
- S7 標準通訊
- S7 通訊
- S5 compatible communication
- 路由
- PROFIBUS DP master/slave
- Open communication over TCP/IP, UDP and ISO-on-TCP (RFC1006)
- PROFINET IO controller
- PROFINET CBA
系統功能
The CPU provides many extensive system functions for diagnostics, parameterization, synchronization, alerting, time measurement, etc.
For detailed information, refer to the manual.技術規范(MyMMP)
| 6ES7 318-3EL00-0AB0 | |
| Product status | |
| associated programming package | STEP 7 V5.3 or higher, Service pack 3 with HSP |
| 電源電壓 | |
| 額定值 | |
|
√ |
|
20.4 V |
|
28.8 V |
| 電壓和電流 | |
| external protection for supply cables (recommendation) | min. 2 A |
| 電流消耗 | |
| 沖擊電流，典型值 | 4 A |
| I2t | 1.2 A2s |
| Current consumption (in no-load operation), typ. | 400 mA |
| 電流消耗(額定值) | 1,050 mA |
| 功耗，典型值 | 14 W |
| 存儲器 | |
| Type of storage | |
|
|
|
1,400 KB |
|
× |
|
|
|
√ |
|
8 MB |
| 后備 | |
|
Yes; up to 700 KB, maintenance-free |
|
√ |
| CPU/程序塊 | |
| DB | |
|
4,095; DB 0 保留 |
|
64 KB |
| FB | |
|
2,048；FB 0 至 FB 2047 |
|
64 KB |
| FC | |
|
2,048；FC 0 至 FC 2047 |
|
64 KB |
| OB | |
|
64 KB |
| 嵌套深度 | |
|
16 |
|
4 |
| CPU/處理時間 | |
| for bit operations, min. | 0.01 μs |
| for word operations, min. | 0.02 μs |
| for fixed point arithmetic, min. | 0.02 μs |
| for floating point arithmetic, min. | 0.04 μs |
| Times/counters and their remanence | |
| S7 計數器 | |
|
2,048 |
|
|
|
√ |
|
0 |
|
2,047 |
|
|
|
√ |
|
0 |
|
999 |
| IEC 計數器 | |
|
√ |
|
SFB |
| S7 定時器 | |
|
2,048 |
|
|
|
√ |
|
0 |
|
2,047 |
|
無保持性 |
|
|
|
10 ms |
|
9,990 s |
| IEC 定時器 | |
|
√ |
|
SFB |
| Data areas and their remanence | |
| Flag | |
|
8 KB |
|
Yes; MB 0 to MB 8191 |
|
8; 1個存儲字節 |
| 數據塊 | |
|
4,095；DB 1 至 DB 2047 |
|
64 KB |
|
Yes; via non-retain property on DB |
| 局部數據 | |
|
1,024字節 |
| 地址區 | |
| I/O 地址區 | |
|
8 KB |
|
8 KB |
|
|
|
8 KB |
|
8 KB |
| 過程映像 | |
|
2 KB |
|
2 KB |
|
256字節 |
|
256字節 |
| 子過程映像 | |
|
1 |
| 數字量通道 | |
|
65,536 |
|
65,536 |
|
1,024 |
|
1,024 |
| 模擬量通道 | |
|
4,096 |
|
4,096 |
|
256 |
|
256 |
| Hardware config. | |
| 機架，最大 | 4 |
| 每個機架的模塊數量，最多 | 8 |
| DP主站的數量 | |
|
2 |
|
4 |
| Number of operable FMs and CPs (recommended) | |
|
8 |
|
8 |
|
10 |
| 時間 | |
| 時鐘 | |
|
√ |
|
√ |
|
10 s |
| Operating hours counter | |
|
4 |
|
0 至 3 |
|
0 to 2^31 hours (when using SFC101) |
|
1 小時 |
|
Yes; must be restarted at each warm restart |
| Clock synchronization | |
|
√ |
|
√ |
|
√ |
|
√ |
|
√ |
|
√ |
| S7 報文功能 | |
| Number of login stations for message functions, max. | 32; depending on the configured connections for PG-/ OP- and S7- basic commmunication |
| 過程診斷報文 | √ |
| 可同時激活的Alarm-S塊，最多 | 60 |
| Test commissioning functions | |
| Status/control | |
|
√ |
|
Inputs, outputs, memory bits, DB, timers, counters |
|
30 |
|
30 |
|
14 |
| 強制 | |
|
√ |
|
輸入，輸出 |
|
10 |
| 狀態塊 | √ |
| 單步運行 | √ |
| 斷點數量 | 2 |
| 診斷緩沖區 | |
|
√ |
|
500 |
| 通訊功能 | |
| PG/OP通訊 | √ |
| 路由 | √ |
| 全局數據通訊 | |
|
√ |
|
22字節 |
| S7 基本通訊 | |
|
√ |
| S7 通訊 | |
|
√ |
| S5-compatible communication | |
|
√；通過CP和可調用的FB |
| 開放的IE通訊 | |
|
Yes; via integrated PROFINET interface and loadable FBs |
|
8 |
|
1,460字節 |
|
Yes; via integrated PROFINET interface and loadable FBs |
|
8 |
|
8,192字節 |
|
Yes; via integrated PROFINET interface and loadable FBs |
|
8 |
|
1,472字節 |
| 連接數量 | |
|
32 |
|
31 |
|
31 |
|
30 |
| 第1接口 | |
| 接口類型 | Integral RS 485 interface |
| Physics | RS 485 |
| isolated | √ |
| 接口電源 (15-30 VDC)，最大 | 150 mA |
| 功能性 | |
|
√ |
|
√ |
|
√ |
|
× |
| MPI | |
|
16 |
|
|
|
√ |
|
√ |
|
√ |
|
√ |
|
√ |
|
× |
|
√ |
|
12 Mbit/s |
| DP主站 | |
|
|
|
√ |
|
√ |
|
× |
|
√ |
|
√ |
|
× |
|
√ |
|
√ |
|
√ |
|
√ |
|
12 Mbit/s |
|
124 |
|
|
|
8 KB |
|
8 KB |
| DP從站 | |
|
|
|
Yes; When interface active |
|
× |
|
× |
|
√ |
|
× |
|
√ |
|
√ |
|
× |
|
√ |
|
12 Mbit/s |
|
|
|
244字節 |
|
244字節 |
|
32 |
|
32字節 |
| 第2接口 | |
| 接口類型 | Integral RS 485 interface |
| Physics | RS 485 |
| isolated | √ |
| 接口電源 (15-30 VDC)，最大 | 200 mA |
| 功能性 | |
|
× |
|
√ |
|
√ |
|
× |
|
× |
|
× |
| DP主站 | |
|
|
|
√ |
|
√ |
|
× |
|
√ |
|
√ |
|
√ |
|
√ |
|
√ |
|
12 Mbit/s |
|
124 |
|
|
|
8 KB |
|
8 KB |
| DP從站 | |
|
|
|
√ |
|
Yes; when interface active |
|
× |
|
× |
|
√ |
|
× |
|
12 Mbit/s |
|
Yes; only with passive interface |
|
|
|
244字節 |
|
244字節 |
|
32 |
|
32字節 |
| 第3接口 | |
| Type of interfaces | PROFINET |
| Physics | RJ45 |
| isolated | √ |
| automatic detection of transmission speed | √；(10/100 Mbit/s) |
| 功能性 | |
|
× |
|
√ |
|
× |
|
√ |
|
× |
| 開放的IE通訊 | |
|
8 |
| PROFINET CBA (at 50 % communication load) | |
|
√ |
|
√ |
| CPU/編程 | |
| 編程語言 | |
|
Yes; 5.3 or higher, Service Pack 3 with HSP |
|
√ |
|
√ |
|
√ |
|
√ |
|
√ |
|
√ |
|
√ |
| Software libraries | |
| Operational stocks | See Instruction List |
| 嵌套級 | 8 |
| 用戶程序保護/密碼保護 | √ |
| 系統功能(SFC) | See Instruction List |
| 系統功能塊(SFB) | See Instruction List |
| 尺寸 | |
| 寬 | 120 mm |
| 高 | 125 mm |
| 深度 | 130 mm |
| 重量 | |
| 重量，約 | 1,250 g |
選型與訂貨數據
| 訂貨數據 | 訂貨號 |
|---|---|
| CPU 319-3 PN/DP | 6ES7 318-3EL00-0AB0 |
| Main memory 1.4 MB, power supply 24 V DC, combined MPI/PROFIBUS DP master/slave interface, PROFIBUS DP master/slave interface, Ethernet/PROFINET interface; MMC required |
|
| 微存儲卡 | |
| 64 KB | 6ES7 953-8LF11-0AA0 |
| 128 KB | 6ES7 953-8LG11-0AA0 |
| 512 KB | 6ES7 953-8LJ11-0AA0 |
| 2 MB | 6ES7 953-8LL11-0AA0 |
| 4 MB | 6ES7 953-8LM11-0AA0 |
| 8 MB | 6ES7 953-8LP11-0AA0 |
| MPI 電纜 | 6ES7 901-0BF00-0AA0 |
| For connecting SIMATIC S7 and the PG through MPI; 5 m in length | |
| 插槽號標簽 | 6ES7 912-0AA00-0AA0 |
| S7-300手冊 | |
| 設計，CPU 數據，模塊數據，指令表 | |
| 德文 | 6ES7 398-8FA10-8AA0 |
| 英文 | 6ES7 398-8FA10-8BA0 |
| 法文 | 6ES7 398-8FA10-8CA0 |
| 西班牙文 | 6ES7 398-8FA10-8DA0 |
| 意大利文 | 6ES7 398-8FA10-8EA0 |
| SIMATIC 手冊匯編 | 6ES7 998-8XC01-8YE0 |
| 電子版手冊存儲在CD-ROM上，多語言： S7-200, S7-300, C7, S7-400, SIMATIC DP (Distributed I/O), SIMATIC PC, SIMATIC PG (Programming device), STEP 7, Engineering Tools, Runtime Software, SIMATIC PCS 7, SIMATIC HMI (Human Machine Interface), SIMATIC NET (Industrial Communication), SIMATIC Machine Vision, SIMATIC Sensors | |
| SIMATIC 手冊匯編1 年更新服務 | 6ES7 998-8XC01-8YE2 |
| Current "Manual Collection" CD and the three subsequent updates | |
| 電源連接器 | 6ES7 391-1AA00-0AA0 |
| 10 items, spare part | |
| 標簽條 | 6ES7 392-2XX00-0AA0 |
| 10 items, spare part | |
| 標簽蓋 | 6ES7 392-2XY00-0AA0 |
| 10 items, spare part | |
| S7 SmartLabel | 2XV9 450-1SL01-0YX0 |
| 根據STEP 7項目中的數據為模塊自動貼標簽的軟件 | |
| Labeling sheets for machine inscription | |
| For 16-channel signal modules, DIN A4, for printing with laser printer; | |
| 10 個 | |
| 深綠色 | 6ES7 392-2AX00-0AA0 |
| 淺褐色 | 6ES7 392-2BX00-0AA0 |
| 黃色 | 6ES7 392-2CX00-0AA0 |
| 紅色 | 6ES7 392-2DX00-0AA0 |
| For 32-channel signal modules, DIN A4, for printing with laser printer; | |
| 10 個 | |
| 深綠色 | 6ES7 392-2AX10-0AA0 |
| 淺褐色 | 6ES7 392-2BX10-0AA0 |
| 黃色 | 6ES7 392-2CX10-0AA0 |
| 紅色 | 6ES7 392-2DX10-0AA0 |
| "SIMATIC S7-300/-400 通訊手冊" | |
| 德文 | 6ES7 398-8EA00-8AA0 |
| 英文 | 6ES7 398-8EA00-8BA0 |
| 法文 | 6ES7 398-8EA00-8CA0 |
| 西班牙文 | 6ES7 398-8EA00-8DA0 |
| 意大利文 | 6ES7 398-8EA00-8EA0 |
| SIMATIC S7 demo case | 6ES7 910-3AA00-0XA0 |
| With mounting components for mounting S7-200 and S7-300 | |
| PROFIBUS 總線部件 | |
| PROFIBUS DP總線連接器RS485 | |
|
|
|
6ES7 972-0BA12-0XA0 |
|
6ES7 972-0BB12-0XA0 |
|
|
|
6ES7 972-0BA50-0XA0 |
|
6ES7 972-0BB50-0XA0 |
|
6GK1 500-0EA02 |
| PROFIBUS Fast Connect 總線電纜 | 6XV1 830-0EH10 |
| Standard type with special design for quick mounting, 2-core, shielded, sold by the meter, max. delivery unit 1000 m, minimum ordering quantity 20 m | |
| RS 485 repeater for PROFIBUS | 6ES7 972-0AA01-0XA0 |
| Data transfer rate up to 12 Mbit/s; 24 V DC; IP 20 housing | |
| PROFINET bus components | |
| IE FC TP standard cable GP 2x2 | 6XV1 840-2AH10 |
| 4-core, shielded TP installation cable for connection to IE FC Outlet RJ45/ IE FC RJ45 Plug; PROFINET-compatible; with UL approval; Sold by the meter | |
| FO Standard Cable GP (50/125) | 6XV1 873-2A |
| Standard cable, splittable, UL approval, sold by the meter | |
| SCALANCE X204-2 Industrial Ethernet switch | 6GK5 204-2BB00-2AA3 |
| Industrial Ethernet switches with integral SNMP access, Web diagnostics, copper cable diagnostics and PROFINET diagnostics for configuring line, star and ring topologies; four 10/100 Mbit/s RJ45 ports and two FO ports | |
| IE FC RJ45 plugs | |
| RJ45 plug connector for Industrial Ethernet with a rugged metal housing and integrated insulation displacement contacts for connecting Industrial Ethernet FC installation cables | |
| IE FC RJ45 plug 145 | |
| 145° cable outlet | |
| 1 個 | 6GK1 901-1BB30-0AA0 |
| 10 個 | 6GK1 901-1BB30-0AB0 |
| 50 個 | 6GK1 901-1BB30-0AE0 |
| IE FC RJ45 plug 180 | |
| 180° cable outlet | |
| 1 個 | 6GK1 901-1BB10-2AA0 |
| 10 個 | 6GK1 901-1BB10-2AB0 |
| 50 個 | 6GK1 901-1BB10-2AE0 |
| PROFIBUS/PROFINET bus components | 參見IK PI產品目錄和CA 01 |
| For establishing MPI/PROFIBUS/PROFINET communication |
更多產品
